TCL Roku TV remote not working – This is a common problem that many users may face at some point or another. This problem can occur due to several reasons, such as battery drain, signal interference, or communication failure between the remote and the TV. To resolve this problem, it is important to first understand why it is happening. In this article, we will discuss in detail the possible causes of TCL Roku TV remote not working and their solutions, so that you can easily solve your problem and enjoy your TV without any hindrance.
Why is the TCL Roku TV Remote not Working?
There can be several reasons why TCL Roku TV remote is not working. Here are some common causes and their possible causes:
Battery problem:
- Dead battery: If the remote’s battery is dead or weak, the remote will not function.
- Battery not installed properly: The battery may not be installed properly, resulting in a lack of power flow.
Signal interference:
- Obstruction between the remote and the TV: If there is an obstruction between the remote and the TV, the signal may not reach the TV.
- Remote distance: if the distance between the remote and TV is so far then The signal may be weak
Remote malfunction:
- Hardware problem: A button or internal part of the remote may be damaged.
- Circuit Problem: The remote will not work if there is a problem with its circuit board.
Pairing Problem:
- Pairing lost: If the TV and remote are unpaired, then the remote may need to pair be pair Again.
- New remote: If you purchased a new remote, it may need to be pair again with the TV.
How to Fix TCL Roku TV Remote not Working
Make sure there are no obstructions between the remote and the TV. Stay close to the TV when using the remote.
To fix the TCL Roko TV remote not working problem, try the following solutions:
Reset the Remote
- Open the remote’s battery cover and remove the batteries.
- Then press and hold the “Power” button for 20 seconds.
- Now put the batteries back in and test the remote again.
Change Batteries
First try changing your batteries to make sure you don’t have any death batteries in your remote. Also, check that you are putting batteries correctly. Don’t put batteries in the wrong polarities.
Pair the Remote Again
If the remote doesn’t work, try pairing it with the TV again.
- Turn off your TV
- Turn on your TV
- Hold the pairing button on the remote for 5 seconds.
- Wait for “pairing complete” massage on screen
Hopefully the issue will be fixed if you are unable to pair your remote, then there will be some hardware issue on the remote. in this case, you need to replace the remote with a new one.
Check for Stuck button on Your Remote
You also make sure that you don’t have any dirt or anything that’s blocking the buttons on your remote. It could be a common reason why the Roku TV remote can stop working.
- Remove the batteries from the Remote
- Hold down the power button
- Try pressing every button repeatedly.
- Slap the remote into your palm a few times
Soft Reset of Roku TV
If you have followed all the steps, but you still have the same problems, then you need to try soft resetting of Roku TV for that.
- Plug out your TV from the wall socket
- Wait for 5 minutes
- Plug Your TV back into the wall socket
- Turn on your TV
Now check if your problem is fixed or not. If not, then there would be some hardware problems.
Also check for
Contact Roku TV Customer Support
With these solutions, you can easily fix TCL Roko TV remote problems. If the issue still persists, it would be wise to contact TCL customer support.